Showing posts with label fabric yardage. Show all posts
Showing posts with label fabric yardage. Show all posts

Wednesday, 13 November 2013

Bold Stripes Easy Quilt Pattern

This is a super quick and easy pattern that can have a fantastic graphic effect if you choose the fabrics carefully. This would suit large print fabrics, batiks and hand dyes, or fabrics that have a more tonal look about them. It has been designed to use the width of the fabric for the backing (no piecing the backing!). Remember when you are picking fabrics that we are aiming for a lot of gender neutral quilts. Here are a few examples.

This green and gold quilt uses a graduation of colour from deep green through yellow-green into yellows. each stripe of colour is framed in white, and the binding is a dark blue-green, although you could use the deepest green stripe fabric.




This is the same quilt using only variations of red from deep to bright. The binding is the same fabric as the centre stripe.



This is the same again using shades of grey from deep on the outside to light in the centre. The binding is the same as the top and bottom stripe. Grey and white are not common themes in quilt making, but this would suit the current style of interior decor with lots of grey and cool brown tones at the moment.



And this is the same quilt as the grey one above, except the white fabric has been replaced with a warm grey-brown in a solid colour. Also good for a modern house. The binding is the grey-brown colour.



Fabric Requirements:

Stripes:

For each of the 7 stripes, cut a 6.5" strip (the width of most rotary cutting rulers) across the width of your fabric. Each strip is 6.5" = 16.5cm of fabric required. I would allow 20cm for each strip you are cutting if you are using different fabrics for each stripe, or 38cm if you are cutting two stripes from the one fabric.

  • Trim the strips to 36.5", making sure you cut the selvedge off both ends.


Sashing and Border:


For the sashing and border, cut eleven 2.5" strips across the width of your fabric. Total length of strips (11 x 2.5") is 27.5" = 70cm of fabric required. I would allow 80cm for straightening and adjusting.

From the 11 strips:
  • Cut down 6 strips to 36.5". These will go in between the wider strips.
  • Cut 1 in half. Sew each half to one end of two other strips, making sure to remove the selvedge. These will be used for the long borders on the left and right side of the quilt. It is OK to have a pieced border (I know some people might worry about that).
  • Keep the others aside for borders. Don't cut them to size just yet.


Binding:



Allow 40cm of fabric to make 2.5" binding strips.


Backing:


You will need 1.6m of backing fabric.


Instructions:

Lay out the pieces in the way you like. Starting with the top stripe, sew on a sashing strip, and then another stripe, and another sashing, and so on, making sure you are keep the whole thing straight and square, until you have something that looks like this:





Then measure the length from top to bottom, making sure you measure through the centre and not along the sides. Trim the two longest sashing strips (the ones you added the extra half a strip to earlier) to that measurement. If you have cut and sewn accurately it should be 54.5", but it is fine if its not quite right. Now it should look like this:





Then measure the width from left to right, making sure you measure through the centre. Trim the two remaining strips to that measurement and sew to the top and bottom. It should look like this:



Now you are ready to make a sandwich with the wadding and backing fabric and get quilting!

If you have any questions, please put them in the comments section below.

Thanks for stopping by!

Tracey.

Simple Rotating 10" Block Quilt

You would have seen the instructions for this quilt in the history section of the first post on this blog, but I thought I would also include some fabric yardages for you. The quilt is currently having the binding hand sewn down, so I should have a finished photo for you later in the week.

This is a illustration of how it would look with just two colours. The fabric requirements will be to make this quilt.



Here is the original post:


Just finished the quilting


This quilt is made up on 10" blocks, 7 rows x 4 columns. It also looks good with only 6 rows. It is a very simple block to make and every alternative block is rotated 90 degrees to create the effect.

To make the block you need:
  • 1 rectangle 6.5" x 10.5"
  • 2 rectangles 2.5" x 10.5"
Sew the two skinny rectangles onto either side of the large rectangle and you're done! Super simple. The block should now measure 10.5" x 10.5" (that will be 10" square when finished).




Fabric Requirements for the Quilt



Using this picture as a guide, we will call the 2.5" x 10.5" rectangles "navy", and the 6.5" x 10.5" rectangles "teal". We will also assume the fabric is 42" wide. It is always worth double checking the width before you buy.

For the Navy:

If the fabric is 42" wide (plus selvedges) you will just squeeze four 10.5" lengths across the width of the fabric. You will need 56 navy rectangles to make this quilt. Therefore, you will need 14 x 2.5" strips across the width of your fabric (56 rectangles divided by 4 in each strip  = 14 strips required). That means you will need 89cm of fabric exactly (14 strips @ 2.5" = 35", and 35" x 2.54 [conversion to cms] = 88.9cm) for those strips. I would buy extra for straightening, etc. You will need 1m of the navy.

NB:
This doesn't include fabric for the binding. If you want to make 2.5" binding out of the same fabric would you need to add another 40cm.

For the Teal:

As above, you should be able to squeeze four 10.5" lengths across the width of the fabric. You will need 28 teal rectangles. Therefore, you will need 7 x 6.5" strips across the width of your fabric (28 rectangles divided by 4 in each strip  = 7 strips required). That means you will need 116cm of fabric exactly (7 strips @ 6.5" = 45", and 45" x 2.54 [conversion to cms] = 115.6cm) for those strips. I would buy extra for straightening, etc. You will need 1.3m of the teal.

Backing:

You will need 2m of fabric for the backing.